Hydraulic Puller Manufacturer,Supplier and Exporter
Product Code : SEL-MMTM-11818
Quick Answer: Pump and cylinder are built into one self-contained unit on this Hydraulic Puller, so no separate pump or hose is needed; it gives a 50 mm stroke, 200 mm spread and 140 mm reach.
Last updated: October 2026
Key Features
- Self-contained: integral pump and cylinder, no separate pump or hose
- Stroke 50 mm, spread 200 mm, reach 140 mm
- Pump rotates through 360°
- Spring retraction and release valve
- Converts to a 2-arm or 3-arm puller
- Heat-treated forged alloy steel jaws; heat-treated, hard chrome-plated piston rod
Technical Specifications
| Specification | Value |
|---|---|
| Stroke | 50 mm |
| Spread | 200 mm |
| Reach | 140 mm |
| Construction | Self-contained pump and cylinder |
| Pump | Rotates through 360° |
| Arms | Convertible, 2-arm or 3-arm |
| Jaws | Heat-treated forged alloy steel |
| Piston rod | Heat-treated, hard chrome plated |
| Retraction | Spring |
About This Product
A puller draws a tight-fitting part off a shaft by pressing against the shaft end while its jaws grip behind the part. On this puller the force comes from a built-in hydraulic pump and cylinder, and the pump rotates through 360° so it can be worked from a convenient position. It converts between 2-arm and 3-arm use for uniform pulling, and the piston returns by spring. School Educational Instrument can ship the Hydraulic Puller to Eritrea, North Macedonia, Lesotho, Sri Lanka and Georgia.
Frequently Asked Questions
Does the Hydraulic Puller need a separate pump?
No. The pump and cylinder are self-contained in the puller, so no separate pump or hose is required.
Can it be used with two or three arms?
Yes. It converts easily between 2-arm and 3-arm use for uniform pulling.
Related: Metal Manufacturing Training Machine, Feeler Gauge, Thread Gauge, Manual Metal Arc Welding Machine.
For a quotation on the Hydraulic Puller, contact School Educational Instrument.
