Quick Answer: Switching between jointing and planing in one machine, the Jointer Planer has a 3 HP induction motor, a 12 in. cutting width and an extra-large extruded aluminium fence with centred controls.
Last updated: October 2026
Key Features
Quick changeover between jointing and planing functions
Extra-large extruded aluminium fence with centred controls for quick adjustments
Fence can stay in place when changing over functions
3 HP induction motor
Built-in dust chute for both planing and jointing operations
Technical Specifications
Specification
Value
Cutting width
12 in.
Cutting depth
1/8 in.
Cuts per minute
5,500
Motor
3 HP induction
Current
12 1/2 A
Tool length
55 in.
About This Product
A jointer flattens one face and squares an edge of a board, and a planer then brings the opposite face parallel to it. This machine does both, and because the fence can stay put during changeover, learners in a wood workshop can move from one operation to the other without resetting it. The built-in dust chute works in both modes. School Educational Instrument can supply the Jointer Planer to schools and colleges in Suriname, Burkina Faso, Barbados, Syria and Djibouti.
Frequently Asked Questions
Does the fence need to be reset when switching functions?
No. The fence can stay put when changing over between jointing and planing.
What is the cutting capacity?
The cutting width is 12 in. and the cutting depth is 1/8 in., at 5,500 cuts per minute.
